How To Update Motorola Xoom Mz604
Firmware Change/Update on MOTOROLA MZ604 Xoom WiFi
How to Update / Change / Repair Firmware in MOTOROLA MZ604 Xoom WiFi phones?
Necessary Drivers and Tools
- Motorola Drivers
- mfastboot_adb
-
- Download necessary Lenovo Moto Firmware
- Some other upload with firmware for Lenovo Moto Firmware
Install Necessary Drivers and Tools
- Unpack Drivers and install it
- Unpack mfasboot_adb past whatever packer to c:\mfastboot
Downloading Necessary Firmware
- Offset, get the model ID and CIDto become the correct firmware. In order to practise it, plough on the MOTOROLA MZ604 Xoom WiFi in the bootloader way and read all information according to the instructions.
You lot may besides check the model ID by entering the IMEI number on IMEI.info - One time y'all have model ID and CID, go to Motorola Firmware and select the advisable model. Then, choose the latest software version(must take the aforementioned CID, downgrade not allowed until y'all not have bootloader unlocked).
- After downloading the software, unpack information technology using any file archiver and copy all the content of the folder into c:\mfastboot where all necessary tools have already been unpacked.
Warning!
Changing firmware in the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before first.
Firmware Update / Alter / Repair in MOTOROLA MZ604 Xoom WiFi
- Launch thecontrol line with admin rights.
- Go to c:\mfastboot directory
- Type cd\ and press enter key.
- Type cd mfastboot and press enter cardinal.
- Check how many organisation.img_sparsechunk.* files our firmware has. Usually, it is three or 4 files.
- Enter the command:
- mfastboot devices and press the enter key
- Blazon commands ane by i and approve each of them by pressing Enter.
- mfastboot.exe oem lock begin
- mfastboot.exe flash partition gpt.bin
- mfastboot.exe wink motoboot motoboot.img
- mfastboot.exe flash logo logo.bin
- mfastboot.exe wink kick boot.img
- mfastboot.exe flash recovery recovery.img
- Depending on the number of system.img_sparsechunk files nowadays in the firmware binder, do the appropriate number of commands, namely 0-3 or 0-4.
- mfastboot.exe flash organisation system.img_sparsechunk.0
- mfastboot.exe flash arrangement system.img_sparsechunk.one
- mfastboot.exe flash system system.img_sparsechunk.2
- mfastboot.exe flash organization system.img_sparsechunk.3
- mfastboot.exe flash organisation system.img_sparsechunk.4
- Next, type in the following commands:
- mfastboot.exe flash modem NON-HLOS.bin
- mfastboot.exe erase modemst1
- mfastboot.exe erase modemst2
- mfastboot.exe wink fsg fsg.mbn
- mfastboot.exe erase cache
- mfastboot.exe erase userdata
- That's all. Now your MOTOROLA MZ604 Xoom WiFi has a new firmware. To reboot it from the bootloader mode to the normal way, employ this command:
- mfastboot reboot and press enter fundamental
- Next the MOTOROLA MZ604 Xoom WiFi phone volition restart and switch on in a normal manner. Information technology will take between 10-20 minutes.
Congratulations!
Source: https://www.hardreset.info/devices/motorola/motorola-mz604-xoom-wifi/faq/firmware-flash/motorola-fastboot-firmware-update-change-repair-fix/
Posted by: kiferfrimply.blogspot.com
0 Response to "How To Update Motorola Xoom Mz604"
Post a Comment